Budget
We were given $250 to spend. Here is what we ordered with that money.
| Orders | ||
|---|---|---|
| Item | Source | Cost |
| Stepper Motor | Amazon | $9.49 x 2 |
| IR Beam Break Sensor | Adafruit | $2.95 x 2 |
| Lead Screw with Stepper Motor | Amazon | $28.99 |
| Belt | Amazon | $12.99 |
| Pulley with Bearing | Amazon | $8.99 |
| Pulley with Fastener | Amazon | $6.99 |
| 80/20 | Temp | $31.99 |
| Tensioner | Amazon | $13.99 |
| Wheels | Amazon | $12.99 |
| Limit Switches | Amazon | $5.99 |
| A4988 Stepper Motor Driver | Amazon | $10.19 |
| L Brackets | Amazon | $8.99 |
We are also fortunate to have access to or be gifted specific materials.
| Gifted/Already Owned | ||
|---|---|---|
| Item | Source | Estimated Cost |
| Arduino | Amazon | $17.99 x 2 |
| Camera | Gifted from Evan Lockwood | $30 |
| 1"x1" 80/20 T-Slot | Gifted from PIE | $30 |
| 1/4 20 0.5" Screw | From Machine Shop | $5 |
| 1/4 20 Nuts | From Machine Shop | $1 |
| 10-24 x 0.5" Screw | From Machine Shop | $10 |
| 10-24 Nuts | From Machine Shop | $2 |
| 8-24 x 0.5" Screw | From Machine Shop | $10 |
| 8-24 Nuts | From Machine Shop | $2 |
| 80/20 T Nuts | Gifted from PIE | $5 |
| 0.5" Plywood (32" x 25") | Gifted from PIE | $8 |
| PLA Filament | From Machine Shop | $10 |
| 9.5" x 1/4" Diameter Steel Bar | Gifted from PIE | $10 |
| E2mm x 8mm Screws | Gifted from PIE | $2 |
| 2mm Diameter x 2mm Thickness Nuts | Gifted from PIE | $2 |
| MG 996R Servo | Gifted from PIE | $8 |
| 10" Carbon x 4.5 mm diameter Fiber Rods | Gifted from PIE | $9 |
| 6" x 6" x 1" Thickness Foam | Gifted from PIE | $2 |