Aditi Vinod

Aditi is an E:Computing major from San Jose, CA. For this project, she focused on firmware for the robot, specifically the servo movement and the RGB Matrix face and made the remote controller. She can typically be found in the largest library team room working on Formula, in Parking Lot D spinning fire, or in her dorm playing video games. She also never wants to wire a radio chip again.

• LinkedIn
• Portfolio
• Github

AJ Evans

AJ is an E:Robotics major from Westchester, NY. For this project, he focused on the electrical aspects of the motors, the electrical integration for the robot, and the power source. Embarrassingly, AJ had never soldered before this project, despite being the electrical point person. Throughout the project, he became increasingly obsessed with the neatness of the internal wiring, but he gave up after having to continuously rewire the same subsystems over and over. AJ is glad he did not have to rewire all the motors a sixth time. Outside of PIE, you can find him in his room knitting, playing the bass, or gaming.

• LinkedIn
• Github

Aja Capel

Aja is a Mech:E major from Champaign, IL. For this project she focused on the structural design for the body and the head. She loves anything and everything cars related and if she's not talking about cars she's probably talking about dinosaurs. If she's not doing either of those you can find her in her room sleeping or playing guitar.

• LinkedIn

Kate McCurley

Kate is an E:Robotics major from Wellesley, MA. For this project, she focused on creating our firmware, radio communication, and electronics design and assembly. She's enjoyed getting to work on designing and integrating both firmware and electrical components throughout working on M-O.

• LinkedIn
• Portfolio
• Github

Sela Domkofski

Sela is from Bethel, CT and has no idea what she's majoring in, but for this project she put on her Mech:E hat despite never having taken a mechanical class (unless DesNat counts). She worked on the robot's internal mechanics, fabrication, and generally tried to make things look nice. On the outside, at least. She also did a lot of soldering. Wires are scary.