Cyberflex
Cyberflex
Here is an itemized list of everything that we bought for this project!
| Item name purchased | vendor | price | quantity | cost |
|---|---|---|---|---|
| EKG Electrodes | Olin (free) | $8.99 | 1 | $8.99 |
| sEMG Sensors | Olin (free) | $40 | 5 | $200 |
| Cardboard | Olin (free) | $5.00 | 1 | $5.00 |
| Servos | Olin (free) | $12.00 | 4 | $48.00 |
| Bearing | McMaster | $19.90 | 2 | $19.90 |
| Double A Battery Holder | Olin (free) | $3.00 | 1 | $3.00 |
| Finger Motors | McMaster | $13.99 | 1 (pack of six) | $13.99 |
| M2 x 30 mm bolt | McMaster | $8.97 | 1 | $8.97 |
| Shaft Collar | ebay | $3.00 | 2 | $6.00 |
| Long Hex Bolt | McMaster | $10.86 | 1 | $10.86 |
| Shoulder screw | McMaster | $6.44 | 1 | $6.44 |
| Shaft Collar | McMaster | $2.76 | 2 | $5.32 |
| Long hex bolt | McMaster | $10.86 | 1 (pack of five) | $10.86 |
| Shoulder bolt | McMaster | $7.86 | 1 | $7.86 |
|---|---|---|---|---|
| Dental Bands | Amazon | $4.99 | 1 | $4.99 |
| Steel Rod | McMaster | $3.25 | 1 | $3.25 |
| Vertical Motors | McMaster | $4.50 | 2 | $9 |
| Rotational Motors | Amazon | $11.99 | 1 | $11.99 |
| PLA Filament | Amazon | $14 | 2 | $28 |
| Raspberry Pi | Olin (free) | $35 | 1 | $35 |
| Arm Band | Target | $13 | 1 | $13 |
| Motor Shields | Olin (free) | $20 | 3 | $60 |
| 9V Batteries | Olin (free) | $2.40 | 1 | $2.40 |
| Double A23 Batteries | Olin (free) | $3.40 | 1 | $3.40 |
| Wires | Olin (free) | $13.00 | 1 | $13.00 |
| Wood | Olin (free) | $10.00 | 1 | $10 |
| Breadboard | Olin (free) | $6.00 | 1 | $6.00 |
| Weights | Amazon | $8.44 | 1 | $8.44 |
| SD Card | Best Buy | $11 | 1 | $11 |
| Battery Bank | Amazon | $30.00 | 1 | $30.00 |
| Arduino Uno R4 | Olin (free) | $10.00 | 1 | $10.00 |
| Total Cost | $619.41 |
This site was created with the Nicepage